Omron NB HMI Training Course (NB-Designer)

Partner: Udemy
Affiliate Name:
Area:
Description: Lecture 1: Create Project (Serial)Lecture 2: Create project (Ethernet)Lecture 3: Upload / DownloadLecture 4: Offline and Indirect SimulationLecture 5: Task BarNB-Designer provides a simple method (i.e. the Task Bar) to make the screen pop up or be minimized, to change the display of the screen and fast switch the screen display etc. Task Bar has 2 operation buttons, one of which is used to control the Menu Screen, and the other is used to control the Task Bar. You can set the Properties such as the Task Bar, whether to use the Menu Screen, color and position and so on in the [PT Property] in the Configuration and Setup Window. (By default, all the options in the Display Task Bar are checked.)Lecture 6: SheetCommon Sheet will always be displayed in the screen, and the components to be displayed forever can be put in Common Sheet. In this way, you can see the state of this component or operate this component at any time. The default Common Sheet is Frame 1. You can use [Change Common Sheet] function key to switch the other screen as the current Common Sheet, but only one screen can be used as the current Common Sheet.Lecture 7: VNCLecture 8: Indirect RefrenceLecture 9: System Information MessageLecture 10: Bit Button & Bit LampBit Button component defines one touching area. When this area is activated, the bit address inside the PT or in the PLC can be switched to “On” or “Off” forcefully.Lecture 11: Bit SwitchBit Switch is the combination of the Bit Lamp and the Bit Button component. It defines a touching area, and the bit address inside the PT or of the PLC can be switched between On and Off state when this area is enabled.Lecture 12: Command ButtonCommand Button component also defines a touching area and the state value will be input into the specified word address when the ar
Category: IT & Software > Other IT & Software > HMI
Partner ID:
Price: 29.99
Commission:
Source: Impact
Go to Course